Stir Rods and Accessories

Glass Stir Rods (22-1900)

Manufactured with borosilicate glass, these 5mm stir rods come with rounded annealed ends. Stir rods are highly chemical resistant and withstands temperatures to 400° F (205°)C.

More Detail

Safe-Lab Joint Stirrer Bearing (60-203201660)

Teflon® PTFE body with Viton® O-ring for use with 10 mm stirring rods. Teflon® insert has inside O-ring for fine adjustment of stirring rod tension. Threaded polypropylene locking...

More Detail

Safe-Lab Stirrer Bearings (60-203201661)

Shown with Stopper-Loc® Nut SAF-T-LINE® threaded size for use with Stopper-Loc® Nut. Allows stirrer bearing to be locked to outer ground joint when stirring viscous materials...

More Detail

Safe-Lab Teflon PTFE Bearing Inserts (60-203211665)

Replacement Teflon® inserts with Viton® O-ring for 10 mm Teflon® stirrer bearings. Two inserts per pack.

More Detail

Stir And Add Cuvette Mixers (60-377520000)

Provides Complete Mixing Made of clear acrylic with a straight handle, this tool is used to add enzymes or other materials to solutions in cuvettes (spectrophotometer cells). Up and down...

More Detail

Stirring Paddle (60-377700000)

STIRRING PADDLES polyethylene This polyethylene paddle is Ideal for hand mixing liquids in large vats and tanks. Use the built in hook to store the paddle near where it is needed and safely...

More Detail

Propeller Stirring Elements - 4 Blade, Stainless Steel, IKA* Works (95-0741000)

Standard stainless steel stirring element. For drawing the material to be mixed from the top to the bottom. Local shearing forces. Generates axial flow in the vessel. Used at medium to high speeds.

More Detail

Propeller Stirring Elements - 3 Blade, Stainless Steel, IKA* Works (95-1296000)

Flow-efficient design. For drawing the material to be mixed from the top and the bottom. Minimum shearing forces. Used at medium to high speeds.

More Detail

Turbine Stirring Elements, Stainless Steel, IKA* Works (95-2332900)

For drawing the material to be mixed from above. Generates axial flow in the vessel. Minimum danger of injury when contact is made with vessel. Minimum shearing forces. Used at medium to high...

More Detail

Dissolver Stirring Elements, Stainless Steel, IKA* Works (95-0513500)

Radial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction. Used at medium to high speeds.

More Detail

Paddle Stirring Elements, Stainless Steel, IKA* Works (95-0757600)

Tangential flow, minimum turbulence, good heat exchange, gentle treatment of product. Used at low to medium speeds.

More Detail

Anchor Stirring Elements, Stainless Steel, IKA* Works (95-2022300)

Tangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of high mineral contents in liquids. The ideal stirrer...

More Detail

Kneading Stirring Element, Stainless Steel, IKA* Works (95-2022500)

Tangential flow with oscillating compacting between the kneading surfaces. Minimum deposits on vessel. Used at low speeds.

More Detail

Paddle Stirrer, Stainless Steel, IKA* Works (95-0527400)

Spare paddle stirrer for with RW 11 basic.

More Detail

Screw-Type Stirrer, Stainless Steel, IKA* Works (95-0527500)

Spare screw-type stirrer for with RW 11 basic.

More Detail

Flexible Coupling, Stirring Accessory, IKA* Works (95-2336000)

Required for stirring tasks using glass stirring rods. The flexible coupling compensates for any structural variances.

More Detail